1. Press the Home button on the remote
2. Scroll down and select Settings
3. Go to Setup > Network > Network Setup
4. Select View Network Settings and Status
5. Note down the IP Address, Subnet Mask and Default Gateway
6. Press the back button, or the left arrow on the remote.
7. Under Network Setup, select Set Up Network Connection
8. Select Custom Setup
9. Select Wired or Wireless Setup
10. Under IP Address Setting select Manual
11. Enter in the IP Address, Subnet Mask and Default Gateway from step 5
12. Select and enter Enter DNS 1 as [sign-up to get this number] and DNS 2 as [sign-up to get this number]
13. Select No for proxy
14. Apply the settings.

If Network Setup is complete press OK to proceed, if it says failed check your internet connection, change Step 8 setup to Auto and try the setup again.

Note: Remember, if your IP address changes you must visit www.vipdnsclub.com/my-account to verify your new IP address at the click of a button (red bar up the top) and everything will work again.

1. Open Settings
2. Go to Network and Network Setup
3. Select Advanced Network Setup
4. Select DNS Setup
5. Set Auto Setup to OFF.
6. Enter Primary as [sign-up to get this number] and Secondary DNS as [sign-up to get this number]
7. Exit Setup

Note: Remember, if your IP address changes you must visit www.vipdnsclub.com/my-account to verify your new IP address at the click of a button (red bar up the top) and everything will work again.

1. Press Home, then Select Setup > Network > Network Setup
2. Select Wired Setup or Wireless Setup depending on how your TV is connected to your home network.
3. Select Custom and Enter Primary as [sign-up to get this number] and Secondary DNS as [sign-up to get this number]

Now restart your TV and it will start using your new VIP DNS!

Note: Remember, if your IP address changes you must visit www.vipdnsclub.com/my-account to verify your new IP address at the click of a button (red bar up the top) and everything will work again.

1. Select Settings
2. In Network Settings Select IP Address/DNS Settings
3. Select Manual in DNS Settings Mode
4. Fill in Primary as [sign-up to get this number] and Secondary DNS as [sign-up to get this number]

Now restart your TV and it will start using your new VIP DNS!

Note: Remember, if your IP address changes you must visit www.vipdnsclub.com/my-account to verify your new IP address at the click of a button (red bar up the top) and everything will work again.

1. Turn On your LG Smart TV and Press Settings.
2. From this settings menu Scroll Down to Network and Select Network Connection.
3. Make sure that your LG Smart TV is connected to LAN or Wireless network. Press Start Connection.
4. Select Your Network and then Select Other Network List.
5. Select Set Expert Button.
6. Select Your Network Connection.
7. Scroll Down to the DNS Mode and select the Manual Tab. Then enter [sign-up to get this number]  and Press OK.
8.  It will test the connection. Press Complete to save the settings and exit the menu.

Now restart your TV and it will start using your new VIP DNS!

Note: Remember, if your IP address changes you must visit www.vipdnsclub.com/my-account to verify your new IP address at the click of a button (red bar up the top) and everything will work again.

1. Press Menu on your Samsung Smart TV remote.
2. From this settings menu Scroll Down to Network.
3. Select Network Settings.
4. Your TV or Bluray player will show you how it’s connected to the internet. Press Start.
5. Select Your Internet Connection. If you select Wireless network and make sure to enter your correct wireless password to connect.
6. Your device will show that it’s tested and connected to the internet properly. Now Select IP Settings.
7. Scroll Down to the DNS Settings and enter [sign-up to get this number] and Press OK.
8. It will now test the connection. Press Next to save the settings and exit the menu.

Now restart your TV and it will start using your new VIP DNS!

Note: Remember, if your IP address changes you must visit www.vipdnsclub.com/my-account to verify your new IP address at the click of a button (red bar up the top) and everything will work again.